Shanghai TU-POLY Industrial Co.,Ltd

Shanghai TU-POLY Industrial Co.,Ltd is one of the leading UPVC two faucet 22.5° elbows FF DIN PN10 (rubber ring) manufacturers and suppliers in China, should you be interested in UPVC two faucet 22.5° elbows FF DIN PN10 (rubber ring), please feel free to wholesale and buy products from our factory.

Name: UPVC Two faucet 22.5°elbows F/F DIN PN10 (Rubber Ring)                                 

Material:UPVC

Standard: DIN

Size: Φ110~Φ315

UPVC Two faucet 22.5° elbow F/F DIN PN 10 (Rubber Ring) Description:  

Light weight

The weight per unit is oily 1/6 of the cast-iron pipes, so the transport is quite convenient. 

High strength 

The strength can get to 45Mp. 

Low resistance 

The internal surface of the pipe is smooth with no dirt and no blockage. The loss is 30% lower than that of the cast-iron pipes. 

Corrosion resistance 

It has a good quality of acid resistance, alkali resistance, chemicals resistance and electrochemistry resistance, so the point of corrosion will not occur during the use. 

Easy installation 

It adopts the glue and soft joining. Therefore, the installation is quite easy and the sealing is reliable. 

Long service life 

The service time can reach more than 50 years under the normal working pressure. 

Low cost 

The cost of the transport and installation is low, and the total engineering cost is 30-40% lower than of the cast-iron pipes. 

Innocuity and sanitation 

The product conforms to the standards of the drink water and water transported has no second pollution. 

UPVC Two faucet 22.5° elbow F/F DIN PN 10 (Rubber Ring)  Specification: